background image

B-320-1CAT-HDIR  Installation and Users Manual

pg.2

www.snapav.com Support: 866.838.5052

IMPORTANT SAFETY INSTRUCTIONS

WARNING: 

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or 

moisture.

1. Read and follow all instructions and warnings in this manual. Keep for future reference.
2. Do not use this apparatus near water.
3. Clean only with a dry cloth.
4. Do not block any ventilation openings. Install according to manufacturer’s instructions.
5. Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus 

(including amplifiers) that produce heat.

6. Do not override the safety purpose of the polarized or grounding-type plug. A polarized plug 

has two blades - one wider than the other. A grounding type plug has two blades and a third 
grounding prong. The wide blade or the third prong is provided for your safety. If the provided 
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

7. Protect the power cord from being walked on or pinched particularly at plug, convenience 

receptacles, and the point where it exits from the apparatus.

8. Only use attachments/accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has 

been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has 
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain 
or moisture, does not operate normally, or has been dropped.

10. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND ENSURE THAT NO 

OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE EQUIPMENT.

11. TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE AC MAINS, DISCONNECT THE 

POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE.

12. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY OPERABLE.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER. NO USER 
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral 
triangle, is intended to alert the user to the presence of un-insulated 
dangerous voltage within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended 
to alert the user to the presence of important operating and 
maintenance (servicing) instructions in the literature accompanying 
the appliance.

Содержание B-320-1CAT-HDIR

















Отзывы: