B-320-1CAT-HDIR Installation and Users Manual
© 2012 Binary
pg.13
6.3. EDID Configuration
6.3.1. EDID Mode Settings
6.3.2. Learning EDIDs
In most cases, EDIDs will not require learning from the display. Only perform learning if
none of the EDIDS available using the Mode Dial does not provide the desired outcome.
1. Set the EDID Mode dial to “7”.
2. Connect the HDMI display to “HDMI IN” on the Transmitter with a HDMI cable.
3. Set “MODE” on the transmitting unit to “7”.
4. Power on the Transmitter by connecting the 5V Power Supply.
5. The LED on the RJ45 of the transmitter will flash On and Off once to learn the EDID.
Keep the mode dial on “7” at all times to use the learned EDID.
6. Unplug the HDMI cable from the display and follow the installation instructions in
section 6.1 B-320-1CAT-HDIR Transmitter Installation.
EDID Setting
Supported Resolutions
Color Depth
Audio Channels
0
1080p @60Hz
24-Bit
7.1 ch
1
1080p @60Hz
24-Bit
2 ch
2
1080p @60Hz
36-Bit
7.1 ch
3
1080p @60Hz
24-Bit 3D
7.1 ch
4
1080p @30Hz
1080i @60Hz,
720p @60Hz
24-Bit
7.1 ch
5
1080p @30Hz
1080i @60Hz
720p @60Hz
24-Bit
2 ch
6
1080p @60Hz
24-Bit 3D
2 ch
7
Learning Mode
