GAT Handheld Coder GAT Pro+ User Manual
©2016 Bimmer Retrofit Inc.
from the drop down menu. Button ‘
ECU Direct
’ will send selected command to selected
ECU. The result of command execution will appear in information display.
‘
Ping ECU
’ button sends standard ‘
ping ident
’ request to selected in drop down menu
ECU. Result of ping will appear in the information display
DTC
DTC tab
is used for basic diagnostic trouble codes read and erase.
By pressing ‘
Read DTC’
button GAT Coder will start reading all DTC trouble codes from
each ECU. This process can take a few minutes and depends on the quantity of DTC
codes stored in the system. Once DTC codes are read by GAT it is possible to view DTC
error codes on the Information Display by using scroll on the right side of the
Information Display. Each DTC error code will include its manufacturer’s standard
number and basic description (if available in the data base). In addition, mileage at
which DTC error occurred will also be shown (if available). All DTC error information
obtained from the vehicle will be stored on the local storage of GAT for further review, if
needed.
