INTELLIPRESS
™
ELECTRIC BENCH TOP PRESS
User Manual
BIM-IEBTPM-1218 Rev 1 | For Technical Assistance: 800-442-4622
10
Press on the parameters to be modified to bring up a pop-up keypad (Figure 8).
See Figure 8: Pop-Up Keyboard
The following parameters can be modified from the Setup - Manual Operations Screen:
•
Jog+ / Jog-:
Indexes the press ram UP (+) or DOWN (-).
•
Initial Position:
The location below the Home Position to where the press will return after each
automatic cycle.
•
Initial Position Speed:
The speed at which the press travels from the Home Position to the Initial
Position and from the Approach Position to the Initial Position.
•
Approach Position:
The location below the Initial Position where pressing torque begins.
•
Approach Position Speed:
The speed at which the press travels from the Initial Position to the
Approach Position. This also includes the speed at which the ram will retract to the Home Position.
•
Full Down Press Position:
The final ram position.
•
Full Down Press Position Speed:
The speed at which the press applies force in the downward
direction.
•
Full Down Press Position Force:
Expressed as a percentage of the force rating of the press, this is the
pressing force applied to the part.
•
Home Position Button:
Directs the press ram to the Home Position.
•
Initial Position Button:
Directs the press ram to the Initial Position.
•
Approach Position Button:
Directs the press ram to the Approach position.
Taskbar Definitions:
•
Error Reset:
Resets any alarms or faults in the press controller.
•
Home Icon:
Returns to the Logged-In Screen (See Figure 5 on page 9).
•
Stop Icon:
Stops the program operation of the press. Note: The stop icon does NOT remove power
from the motion control system
Modify the Setup - Manual Operations values as necessary.
When manual operations are complete, press the Home icon.
