Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar (Italy).
The pages must be reproduced and folded in order to obtain
a booklet A5 (+/- 148.5 mm width x 210 mm height). When
folding, make sure you keep the good numbering when you
turn the pages of the I/B. Don’t change the page numbering.
Keep the language integrity.
13
/
40
Assembly page 13/40
Fax +32 030 9904733
4)
Attach the fan body (10) to the lower fixed rod (13) (pay
attention to the proper functioning) by plugging the hole of
the upper fixed rod (15) to the lower one, lock it by turning
the upper fixed rod counterclockwise.
5)
Couple the front grid (11) with the rear grid (12) and lock with the plastic ring
and ensure the fastening with the appropriate locking screw (9), (the screw
must be in the lower part). Having done this, check that the protection grid is
firmly coupled and fastened to the motor.
6)
Extend the adjustable rod (8) to the desired height and secure by tightening the
fixing rod fastening screw (7).
7)
Fix the fan to the base, then engage the column (5) to the lower column (4) so
that tabs and grooves collimate, and for motor locking counterclockwise until it
stops.
8)
The fan can also be used without
the lower fixed rod (4), remove the
lower rod from the base by turning
it clockwise, directly fix the upper
rod to the entire counterweight
base,
locking
it
in
a
counterclockwise direction.
Complete fan
Fan with lower fixed
rod
Pannello comandi
A.
Button 0-Off
B.
Oscilattion
button
C.
Button
On/Speed
D.
Timer
button
Remote control
A.
Button 0-Off
B.
Oscillation button
C.
Button On/Speed
D.
Timer button
E.
Mode
(normal,
natural, sleep)