Bimar AP12, Инструкция

Страница: 14 / 16

-
“Alexa”, turn off XX (name of the device)
-
etc.
For the TV: try to say "Alexa" turn on the TV (set name of the device)/turn volume up or down/go to
xxx Channel/turn off the TV.
Note: the voice control has preset functions, our customer service (assistenza.privati@bimar-spa.it)
is always available to send an updated list of controls supported by the devices.
DIY devices do not support vocal commands.
Use
Connect the device via the cable (included in the package) to a power supply with USB input (input
DC5V1A) and to the device, if they were not previously connected.
To pair a new remote control (38KHz frequency) to the device there are several solutions.
DIY
Open APP: press the
⇒ ⇒
key and perform the procedures
described in the screen of your phone (1. Click the “+” key. 2. Briefly press the key on the remote
control you want to pair).
Note: always place the remote control very close to the device (maximum distance 3cm) and press
the button to pair. At the end of the pairing procedure, press the button at the top right “Save”.
BIMAR brand device (example: fan or fan heater)
1. Open the APP: press the
⇒
key select: Bimar, press the "On-Off" key if the fan
turns on select the "You can control" key (Try to combine at least 3 keys) and carry out the procedures
described on the screen.
2. Open the APP: press the
⇒ ⇒ ⇒
key the screen appears: Quick pairing
and press the message: “I will not pair button by button”
⇒
carry out the procedures described in
the screen.
3. Open APP: press the
⇒ ⇒ ⇒
key the screen appears: Quick pairing and
press the message: “OK”
⇒
carry out the procedures described in the screen.
TV
Open APP: press the
⇒ ⇒ ⇒
button select the brand of the television,
press the "On-Off" button if the product turns on, select the "You can control" button (Try to combine
at least 3 buttons) and perform the procedures described on the screen.
Attention: if at the end of the procedure the keys do not correspond to the associated functions, it is
possible to modify each key individually: open the device screen, press "Edit" at the top right, select
"copied keys": press the key on the screen for a few seconds on the phone screen and then briefly
press the button on the remote control. At the end of the pairing procedure, press the button at the
top right “Save”.
During long periods of inactivity, remove the plug from the electric socket.