© 2011-10-10 Biltema Nordic Services AB
© 2011-10-10 Biltema Nordic Services AB
User manUal
Please read the following information before using a
new helmet.
Basic information
The helmet is produced according to the newest
technology and is specifically designed for motorcy-
clists. Using a helmet dose not exclude all possibi-
lity of injury, in some instances impact may be too
high to protect the user effectively from fatal head
injuries.
instrUctions for Use
1. Invisibility:
Ensure that the visor is clean and
seamless at all times, never use a smoky visor at
night or visibility will be poor. Exchange a damaged
visor for a genuine replacement immediately.
2. No modification:
Never make any changes to any
part of the helmet. Don’t make any alterations to the
outer shell, don’t insert screws and most importantly
don’t apply paint. Keep us informed if you would like
to paint the helmet.
3. Care and cleaning:
When cleaning the shell and
interior of the helmet, never use solvents, petrol and
other detergents. Only use water and PH balanced
soap. Use soap and a small brush to clean the pad
and the visor. Leave the visor to air-dry. Don’t ex-
pose the visor to any sources of heat.
4. Retention system:
The retention system has to
be carefully set and locked always.
5. Scarves:
Never wear scarves and other headgear
underneath the retention system. Always ensure that
there is no airflow restriction inside the helmet.
6. Spare parts:
Only use the original spare for the
helmet.
7. Inspections replacement:
The helmet is desig-
ned to absorb the energy of a blow and a collision by
destroying some of its components. In the event of
a further blow, it will not protect you any longer, so it
must be replaced even though it doesn’t show any
external damage.
3
2
