-16-
10. Cleaning, maintenance and repair
6. Waste material like oil, or others must be probably disposed of and recycled
according to the national regulation; if necessary, bring it to a recycling
company.
7. All bushings and bearings have been lubricated at factory. To increase their life
expectancy, regular maintenance is recommended.
8. Harsh environments may require more frequent maintenance.
10.3 Daily inspection
Visually check for structural deformation or cracks of arms, forks, or any other
component and unusual noise or binding of the lifting mechanism. Do not use the
product if any malfunction or fault is detected.
1. Check if there is any oil leakage.
2. Check the vertical movement of the lifting mechanism.
3. Check the smooth movement of the wheels.
4. Check if there are any particles or damages on the wheels.
5. Check if all the bolts and nuts are tightened firmly.
6. Verify that all labels are in place, undamaged and readable.
7. Check if all parts are functional as described within these instructions.
10.4 Monthly inspection
1. Check hydraulic oil level (more frequently for high use applications).
2. All bearings and shafts are provided with long-life grease at factory. Long-life
grease should be applied to the lubrication points at monthly intervals or after
each time the product is cleaned.
3. Change oil (more frequently if colour has substantially darkened or feels gritty)
(
→
10.7 Adding hydraulic oil to the pump reservoir).
NOTE:
lf hydraulic oil is milky white in colour and water is in the
hydraulic system, change the hydraulic oil immediately.
10.5 Repair
This product does not contain any parts that can be repaired by the consumer.
Contact a qualified specialist to have it checked and repaired.
WARNING!
Always make sure all guards, if available, have been reinstalled
safely and correctly after each cleaning or maintenance
operation! Never use the product without its guards!
(IM)237‐000413_RHP25_GB-IM_V4_150626.indd 16
7/3/15 17:09
