QV PUSH Owner’s Manual
Part No 27831508
9
TROUBLESHOOTING
Problem
Possible Cause
Solution
Abnormal vibration
Loose or out of balance impeller or loose engine.
Check impeller and replace if required.
Check engine.
Will not vacuum or has poor
vacuum performance
Dirty debris bag. Nozzle height set too high or low.
Hose kit cap missing. Clogged nozzle or exhaust.
Excessive quantity of debris.
Clean debris bag. Shake bag clean or
wash. Adjust nozzle height. Check for hose
kit cap. Unclog nozzle or exhaust. Allow air to
feed with debris.
Engine will not start
Stop switch off. Throttle in off position. Engine not in
full choke position. Out of gasoline. Bad or old
gasoline. Sparkplug wire disconnected. Dirty air
cleaner. Low oil (honda only).
Check stop switches, throttle, choke
position and gasoline. Connect spark plug
wire. Clean or replace air filter. Or contact a
qualified service person.
Engine is locked, will not pull over Debris locked in impeller. Engine problem.
See page 6. Contact a engine service dealer
for engine problems.
Nozzle scrapes ground in lowest
height setting
Nozzle height out of adjustment.
Adjust nozzle height (See Nozzle height fine
adjustment for hard surfaces on page 6.
NOT
FOR
REPRODUCTION
