QV PUSH Owner’s Manual
Part No 27831508
5
PACKING CHECKLIST
Your Billy Goat is shipped from the factory in one carton, completely assembled except for the nozzle and handle.
PUT OIL IN ENGINE BEFORE STARTING
ASSEMBLY
READ
all safety instructions before assembling unit.
TAKE CAUTION
when removing the unit from the box.
NOTE
: Items in ( ) can be referenced in the Parts Illustrations and Parts Lists on pages 10-13
1. REMOVE
the unit from the box. Be careful as not to damage the unit.
2. REMOVE
the bag and attach the handle to the hood using the hardware from the parts bag. The large washer should be on
the inside and the bolt should run from the inside of the hood out. The arch of the handle should be facing to the front of the
machine and the cables shoud not be twisted around each other.
NOTE
: The left cable should run to the right side of the
transmission and right cable to the left of the transmission. Cable twisting will interfere with the operation of the machine
and will cause premature cable wear.
3. ATTACH
the front nozzle (item 7) to the housing and secure it with the serrated hex nuts (item 58) located in the parts bag.
Boxing Parts
Checklist
Debris Bag P/N-831225
Dust Sock P/N-831268
Front Nozzle P/N-831606
Literature Assy P/N-831021
Screwcap 5/16”-18 x 1 3/4 qty 4
P/N-8041031
Washer 2” OD x .344 ID qty 4
P/N-810652
Washer 5/16” Flat qty 4
P/N-8171003
Nut Lock 5/16” – 18 qty 4
P/N-8160002
Briggs & Stratton 5.0 HP
PARTS BAG & LITERATURE ASSY
Warranty card P/N- 400972, Operator’s Manual P/N-27831516, Declaration of Conformity P/N-100506. General
Safety and Warnings Manual P/N-100294
NOT
FOR
REPRODUCTION
