Billy Goat PL2501SPH Скачать руководство пользователя

Страница: 25 / 40

382506_A_HI

Spare Parts List

Please refer to this list of spare parts you may need to service your BILLY GOAT® Aerator. You can order

these parts through our customer service team. Please refer to our website at www.billygoat.com.

Part Number

Description

Application

382244

TINE, PLUGR .625"-11 BLACK

Aerator Tine

382227

GATE, 6 TINE

Plastic Tine Plate

382273

BELT, V, 5L 61.82EL OHR ETH, AMD CD

Tine Drive Belt

380213

BEARING JOURNAL 2” DIA

Tine Rod Cap Bearing

373300

WHEEL, 8” X 3” HEAVY DUTY

Caster Wheel

382268

BELT, V, 3V 53.00EL OHR CL, PLY CD

Drive Belt

382239

ASM, WHEEL & TIRE PLUGR TURF

Rear Wheel and Tire

Warranty Information

When servicing engine refer to specific manufacturer’s engine owner's manual. Engine warranty is covered by

the specific engine manufacturer. If your engine requires warranty or other repair work contact your local ser

vicing engine dealer. When contacting a dealer for service it is a good idea to have your engine model number

available for reference (See table page 3). If you cannot locate a servicing dealer in your area you can contact

the manufacturer’s national service organization.

American Honda

: 800-426-7701

Briggs and Stratton

: 414-479-8008

Warranty Claim Procedure

Should a BILLY GOAT® machine fail due to a defect in material and/or workmanship, the owner should make a

warranty claim as follows:

• The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing

BILLY GOAT Dealer.

• The owner must present the remaining half of the Warranty Registration Card, or, if this is not available,

the invoice or receipt.

• The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their

respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under

warranty must be tagged and retained for 90 days. The model number and serial number of the unit must

be stated in the Warranty Claim.

• The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.

• The Technical Service Department at BILLY GOAT will study the claim and may request parts to be

returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from

whom the claim was received.

• The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim

is final and binding.

For online product registration go to www.billygoat.com

NOT

FOR

REPRODUCTION

Содержание PL2501SPH









































Результаты поиска

Содержание PL2501SPH

Отзывы:

Похожие инструкции для PL2501SPH

Бренды по названию

Популярные бренды

Billy Goat PL2501SPH, Руководство пользователя

Результаты поиска

Содержание PL2501SPH

Отзывы:

Похожие инструкции для PL2501SPH

Бренды по названию

Популярные бренды