Billy Goat PL1802V Скачать руководство пользователя

Страница: 19 / 33

382514_B_HI

Warranty Information

When servicing engine refer to specific manufacturer’s engine owner's manual. Engine warranty is covered by

the engine manufacturer. If your engine requires warranty or other repair work contact your local servicing en

gine dealer. When contacting a dealer for service it is a good idea to have your engine model number available

for reference (Refer to the Specifications section of this manual). If you cannot locate a servicing dealer in your

area you can contact the manufacturer’s national service organization.

Briggs and Stratton: 414-479-8008

WARRANTY CLAIM PROCEDURE

Should a BILLY GOAT ® machine fail due to a defect in material and/or workmanship, the owner should make

a warranty claim as follows:

• The machine must be taken to the dealer from whom it was purchased or to an authorized Servicing

BILLY GOAT Dealer.
• The owner must present the remaining half of the Warranty Registration Card, or, if this is not available,

the invoice or receipt.
• The Warranty Claim will be completed by the authorized BILLY GOAT Dealer and submitted to their

respective BILLY GOAT Distributor for their territory Attention: Service Manager. Any parts replaced under

warranty must be tagged and retained for 90 days. The model number and serial number of the unit must

be stated in the Warranty Claim.
• The distributor service manager will sign off on the claim and submit it to BILLY GOAT for consideration.
• The Technical Service Department at BILLY GOAT will study the claim and may request parts to be

returned for examination. BILLY GOAT will notify their conclusions to the distributor service manager from

whom the claim was received.
• The decision by the Technical Service Department at BILLY GOAT to approve or reject a Warranty Claim

is final and binding.

For online product registration go to www.billygoat.com

Spare Parts List

Part

Part Number

Application

Tines

382244

Aerator Tine Assembly

Tine Plate

382325

Aerator Tine Assembly

ISO Mount Bushings

373257

Handlebar Assembly

Clutch Cable

380221

Controls

Drive Belt

520006

Drive Belt

Wheels

381768

Wheel and Tire

Please refer to this list of spare parts you may need to service your BILLY GOAT® Aerator. You can order

these parts through our customer service team. Please refer to our website at www.billygoat.com.

NOT

FOR

REPRODUCTION

Содержание PL1802V


































Результаты поиска

Содержание PL1802V

Отзывы:

Похожие инструкции для PL1802V

Бренды по названию

Популярные бренды

Billy Goat PL1802V, Руководство пользователя

Результаты поиска

Содержание PL1802V

Отзывы:

Похожие инструкции для PL1802V

Бренды по названию

Популярные бренды