background image

       Part No. 350245                                                                                                                                                            Form No. F011003A

Page 3 of 12

                    PUT OIL IN ENGINE BEFORE  STARTING

Read all safety and operating instructions
before assembling or starting this unit.

Engine

Manual Per

Model

These items should be included in your carton.  If any
of these parts are missing, contact your dealer.

ASSEMBLY

PACKING CHECKLIST

GENERAL SAFETY

For your safety and the safety of others, these directions should be followed:

Use of Ear Protection is recommended while
operating this machine.

Use of Eye and Breathing protection is recommended
when using this machine, especially in dry and dusty
conditions.

·DO NOT

 place hands or feet underneath unit, near debris

 outlet or near any moving parts.

·DO NOT

 start engine without height adjust lever in up

position and clutch bail disengaged.

·DO NOT

 start or operate machine with guards removed.

·DO NOT

 perform any service on the unit without removing

the spark plug wire.

·DO NOT

 operate a machine that exhibits excessive vibration.

·DO NOT 

operate this machine on slopes greater than19°.

·DO NOT

 use this unit on any surface other than grass lawns.

·DO NOT

 allow children to operate this equipment.

-

DO

 read all maintenance and operating instructions before begining

work.
-

DO

 read all engine manufacturers operating and maintenance

instructions.
-

DO

 inspect lawn before begining work.  Remove all rocks, wire,

string, or other objects that can present a hazard during work prior to
starting.
-

DO

 identify and mark all fixed objects to be avoided during work,

such as sprinkler heads, water valves, buried cables, or clothes line
anchors, etc.

9

10

11

Do not operate this machine without first reading
owner's manual and engine manufacturer's manual.

Check

Check

Briggs & Stratton
6.5 Intek OHV

Per Model

Honda  GX  5.5  OHV

1. 

ASSEMBLE

 left rear wheel to axle using 3/4" wrench.

2. 

UNFOLD

 the upper handle (item 26) and slide handle lock loops

(item 28) into place to secure the upper handle to the lower.
3. 

CHECK

 engine oil level and fill to proper level with engine manufactur

ers recommended grade of oil.  Move height adjust lever to down
position, to level engine during checking.  See engine manufacturers
instruction manual.
4. 

CONNECT

 spark plug wire.

Literature

Assembly

350243

Wearing gloves is recommended while
operating this machine.

Check

Owner's

Manual

350245

Literature PR

Accessories

350246

Check

Check

EU Declaration

of Conformity &

EU Distributor

List   350139

Check

Warranty

Card  400972

28

28

26

Check

Honda  GC  5.0  OHC

Check

Subaru  4.5  OHV

All manuals and user guides at all-guides.com

Содержание CR450S













Отзывы: