BC26EU HYDRO-DRIVE Owner’s Manual
Part No 501533
12
501533_-_HI
TRANSAXLE
DRIVE
ADJUSTMENT
DISCONNECT
spark plug wire before servicing unit.
DECREASE
INCREASE
1.
Disconnect spark plug wire.
2.
Adjustments to cable tension are made at the barrel entering the
Drive Control Levers.
3.
Adjust cable tension by tightening or loosening cable adjustment
barrel on rear of engine base (see below).
NOTE
: Moving the cable adjustment barrel OUT increases tension.
Moving the barrel IN decreases tension. Increasing the tension too
much will cause the drive to stay engaged whereas not enough will
cause it not to engage when the lever is pulled.
4.
Reconnect spark plug wire.
NOT
FOR
REPRODUCTION
