AE403 Owner’s Manual
360512_A_HI
5
PACKING CHECKLIST
Your Billy Goat is shipped from the factory in one carton, completely assembled.
PUT OIL IN ENGINE BEFORE STARTING
ASSEMBLY
READ
all safety instructions before assembling unit.
TAKE CAUTION
when removing the unit from the box.
NOTE
: Items in ( ) can be referenced in the Parts Illustrations and Parts Lists on pages 10-13.
1.
UNFOLD
the upper handle (item 48) and slide handle lock loops (item 118) into place to secure the upper handle to the
lower handle (item 82 & 83).
2.
ASSEMBLE
the water tank to the unit and secure with the two carriage bolts, two locknuts and washers (items 137, 105
and 111) that can be found in the parts bag.
3.
FILL
the water tank (item 2) to desired weight with water ONLY.
4.
CHECK
engine oil level and fill to proper level. Also check oil in gear reduction reservoir and fill if necessary. See engine
owner’s manual for type and amount of oil to use. Move the tine engagement lever to the down position, to level engine
during checking.
5.
CONNECT
spark plug wire. Set the engine stop switch to the
ON
position. You will use the stop switch on the handle
during operation.
Boxing Parts
Checklist
Owner’s Manual
AE403 360512
Engine Manual Per
Model
Vanguard
PARTS BAG & LITERATURE ASSY
Warranty card P/N- 400972, Owner’s Manual P/N-360512, General Safety and Warnings Manual Renovation-
100295, Declaration of Conformity P/N-100500.
FILL WITH WATER
ONLY!
NOT
FOR
REPRODUCTION
