Billy Goat 5901808 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 48

Billy Goat 5901808 Скачать руководство пользователя страница 21

Not for

Reproduction

17

Operation

1. Park machine safely.

2. Allow engine to cool.

3. Remove any debris from around fuel tank cap/

gauge area.

4. Remove fuel tank cap/gauge slowly to allow any

pressure built up in tank to escape. Use caution
with the gauge assembly to prevent damage to
gauge.

5. Only

fi

ll fuel tank to bottom of

fi

ller neck. Do not

over

fi

ll. Clean up spilled fuel immediately.

6. Re-install fuel tank cap/gauge.

Transaxle Bypass Valve

IMPORTANT:

DO NOT

push or tow machine without

fi

rst engaging the transaxle bypass valve. Transaxle

damage may occur.

To move the machine with the engine not running the
transaxle bypass valve

must

be engaged.

1. Pull cable out past stop and move sideways to

engage transaxle bypass valve.

Transaxle Bypass Valve Engaged

2. After moving the machine, pull cable sideways

allowing cable to retract and disengage transaxle
bypass valve.

Transaxle Bypass Valve Disengaged

«
...
19
20
21
22
23
...
»

Содержание 5901808

















































Отзывы:

Нет отзывов