Billion BiPAC 8500, Руководство пользователя

Страница: 171 / 177

167
Click Create to setup up an additional WAN interface for video applications. A total of 8 VLAN is
supported; therefore, only 8 WAN interfaces can be created in the table.
From the example, PVC 0/33 to 0/39 is assigned to video using 1483 Bridged mode. Check RFC
1483 Bridged and click Next to continue the setup.
Enter 0 for VPI and 33 for VCI in their respective blanks provided. Select an appropriate ATM
Class, Encapsulation Method, Acceptable Frame Type and Filter Type from their drop down menus
and enter the correct PVID for Untagged Frames in the blank. When all information has been
entered, press Apply to save changes.
From the example, only VPI and VCI sections need to be filled in and leave the rest of the section
as it is. Repeat the same procedure by clicking Create > select RFC1483 Bridged > fill-in the rest
of the PVC 0/34 to 0/39.
Step 3: Setup Member Ports
Go to Configuration > Advanced > VLAN Bridge.
DefaultVlan lists all its member ports. It is necessary to group specific member ports for each
VLAN.
In the example, 2 VLAN groups are requested: Data and Video. To create another VLAN group for
Video, click Create VLAN.
Give a name and ID (PVID) to identify the Video group. The valid value range for PVID is 1 ~
4094.
From the example:
VLAN untagged ports for Data/Internet: ethernet, wireless and wireless_wds.
VLAN untagged ports for Video: ethernet1, rfc-1483-0 ~ rfc-1483-6.
Click Apply to made changes effective immediately.