Billion BiPAC 7402NX(L) 802.11n 3G/ADSL2+ (VPN) Firewall Router
Chapter 4: Configuration
66
Detail:
You can define the destination port and packet type (TCP/UDP) without checking by
timer. It allows you to set which outgoing traffic will not trigger and reset the idle timer.
MTU:
Maximum Transmission Unit. The size of the largest datagram (excluding media-specific headers)
that IP will attempt to send through the interface.
RIP:
RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
TCP MSS Clamp:
This option helps to discover the optimal MTU size automatically. Default is enabled.
Obtain DNS:
A Domain Name System (DNS) contains a mapping table for domain name and IP
addresses. DNS helps to find the IP address for the specific domain name. Check the checkbox to
obtain DNS automatically.
Primary DNS:
Enter the primary DNS.
Secondary DNS:
Enter the secondary DNS.
Default Route:
Check to enable default route
IPv6:
check to enable IPv6 service. If enabled, please set the IPv6 Address, Ipv6 DNS, similar as IPv4.
IPv6 Address:
type the IPv6 address from your ISP, or get it automatically. ” ::” means to obtain IPv6
address automatically.
Obtain IPv6 DNS:
check
Automatic
to obtain DNS automatically. If not, please type the concrete ones
in the Primary and Secondary fields.
.
Содержание BiPAC 7402NX
Страница 55: ...Billion BiPAC 7402NX L 802 11n 3G ADSL2 VPN Firewall Router Chapter 4 Configuration 51 setting of the registrar...
Страница 57: ...Billion BiPAC 7402NX L 802 11n 3G ADSL2 VPN Firewall Router Chapter 4 Configuration 53...
Страница 62: ...Billion BiPAC 7402NX L 802 11n 3G ADSL2 VPN Firewall Router Chapter 4 Configuration 58...