Billion BiPAC 7402GL R4 Скачать руководство пользователя страница 85

Страница: 85 / 115

Inbound IP Throttling (WAN to LAN)

IP Throttling allows you to limit the speed of the IP traffic. The value entered in the Rate Limit blank
will set the speed limitation of the application.

Name

: User defined description to identify the new policy/application created.

Time Schedule

: Schedule your prioritization policy. Refer to

Time Schedule

for more

information.

Protocol

: The name of the supported protocol.

Rate Limit

: To limit the speed of the inbound traffic.

Source IP Address Range

: The source IP address or the range of the packets to be monitored.

Source Port(s)

: The source port of the packets to be monitored.

Destination IP Address Range

: The destination IP address or the range of the packets to be

monitored.

Destination Port(s)

: The destination port of the packets to be monitored.

Содержание BiPAC 7402GL R4




















































































































Результаты поиска

Содержание BiPAC 7402GL R4

Отзывы:

Billion BiPAC 7402GL R4, Руководство пользователя, Страница: 85 / 115

Результаты поиска

Содержание BiPAC 7402GL R4

Отзывы: