Billion BiPAC 7402GL R4 Скачать руководство пользователя страница 52

Страница: 52 / 115

MPoA Connection

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using

PPP.

Profile Port:

Select the profile port as ADSL.

Protocol:

The ATM protocol will be used in the device.

Description:

A given name for the connection.

VPI/VCI:

Enter the information provided by your ISP.

ATM Class:

The Quality of Service for ATM layer.

NAT:

The NAT (Network Address Translation) feature allows multiple users to access the Internet

through a single IP account, sharing a single IP address. If users on your LAN have public IP
addresses and can access the Internet directly, the NAT function can be disabled.

Encap. method:

Choose whether you want the packets in WAN interface as bridged packet or

routed packet.

MTU:

Maximum Transmission Unit. The size of the largest datagram (excluding media-specific

headers) that IP will attempt to send through the interface.

IP (0.0.0.0:Auto):

Specify an IP address allowed to logon and access the router’s web server.

Note: IP 0.0.0.0 indicates that all users who are connected to this router are allowed to logon
the device and to modify data.

Netmask:

The default is 255.255.255.0. User can change it to other such as 255.255.255.128.

Type the subnet mask assigned to you by your ISP (if given).

Gateway:

Enter the IP address of the default gateway (if given).

Содержание BiPAC 7402GL R4




















































































































Результаты поиска

Содержание BiPAC 7402GL R4

Отзывы:

Billion BiPAC 7402GL R4, Руководство пользователя, Страница: 52 / 115

Результаты поиска

Содержание BiPAC 7402GL R4

Отзывы: