Billion BIPAC-5100 Скачать руководство пользователя страница 3

Страница: 3 / 53

Chapter 1

Introduction the BIPAC-5100/5100W

802.11b is only supported for the BIPAC-5100W

1.1 Introducing the BIPAC-5100/5100W

Welcome to the Billion BIPAC-5100(W) Router. Your Billion router is an “all-in-one” unit,

combining an ADSL modem, ADSL router and Ethernet network switch, providing

everything you need to get the machines on your network connected to the Internet

over your ADSL broadband connection.

The BIPAC-5100/5100W integrates high-speed 10/100Mbps auto-negotiating LAN

interface(s) and a high-speed ADSL port into a single package.

The BIPAC-5100W provides a wireless LAN connectivity allowing users to enjoy the

convenience and mobility of working anywhere within the coverage area.

The web browser-based Graphical User Interface provides easy management and is

totally independent of the operating system platform you use.

1.2 Features of the BIPAC-5100/5100W

ADSL Multi-Mode Standard

Supports downstream transmission rates of up to 8Mbps and upstream

transmission rates of up to 1024Kbps. It also supports rate management that

allows ADSL subscribers to select an Internet access speed suiting their needs

and budgets. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2;

G.dmt(G.992.1); G.lite(G992.2)). The Annex A and B are supported in different

H/W platforms.

Wireless Ethernet 802.11b (5100W Only)

Provides a wireless Ethernet 802.11b access point for extending the

communication media to WLAN.

Fast Ethernet Switch

Содержание BIPAC-5100






















































Результаты поиска

Содержание BIPAC-5100

Отзывы:

Похожие инструкции для BIPAC-5100

Бренды по названию

Популярные бренды

Billion BIPAC-5100, Руководство пользователя

Результаты поиска

Содержание BIPAC-5100

Отзывы:

Похожие инструкции для BIPAC-5100

Бренды по названию

Популярные бренды