Billion BiPAC 3100SN, Руководство пользователя

Страница: 41 / 48

4.3.5 AP Client
The AP Client provides the new function of wireless client for AP. It not only enables one AP to
connect to another one within its wireless coverage but keeps its original AP function at the same
time. The use of AP client is more convenient than that of WDS for AP connections.
Wireless AP List
In the AP list,you can see the channel, SSID, MAC Address, Security, Signal and Wireless Mode
of the searched working APs in the neighborhood. To connect two APs, please follow the steps
below. Click “Refresh AP List” to renew the wireless AP List.
• Step 1 : Click the “AP Selection” radio button to select the specified AP you want to connect.
the AP information will show up in the bottom of the screen.
• Step 2 : If the AP selected have security, you need to provide the same security key to build
the safety connection.
• Step 3
: If the AP hids the SSID, you must input the SSID manually.
• Step 4: Click “Enable” If you want to activate the AP Client Service.The default setting is
disable.
• Step 5: Click”Apply” buttont to confirm the setting.
Note :
1. It should be noted that the channel will be changed as the same as the AP selected after
clicking “Apply” button to enable AP Client Service.
2. If the AP to be connected is not shown on the AP List, you should click one of the radio
button and click “Edit” at the bottom of the screen to enter SSID manually.
37