29
Bridge Mode
In Bridge Mode, AP will not send beacon out and deal with probe request packets
, so that wireless
client will not be possible to connect with this device. The device can use complete bandwidth of
WDS connection.
● Step 1:
If you want the device to be a bridge, select Bridge Mode from the drop-down menu.
● Step 2:
Fill in the blank with MAC Address of the connected device(s), which
display in WDS
Bridge and Repeater Mode.
4 AP MAC Addresses can be filled simultaneously.
it is
important that your peer’s AP must include your MAC address and all of the
AP's channel must be the same in WDS to acknowledge and communicate with
each other.
● Step 3:
Click "Wireless Security" to set the encryption keys (Please resfer to
Wireless Security/
Encryption Settings
section after setting up the WDS Mode).
● Step 4:
Select
Phy Mode.
This field is available when Bridge Mode is selected.
There are 4
options: CCK (11b mode), OFDM(11g mode), HTMIX (11b/g/n mode)
and GREENFIELD (11n mode).
Note: Please be aware that when you key in the AP MAC address in the blank and create the
connection, you are not suggested to build the network connection via the AP Client again
since it may cause connection malfunction among divices.
Содержание BiPAC 3100SN
Страница 9: ...5 ...
Страница 13: ...2 4 3 Product Application 9 ...
