Billion ADSL Modem / Router BIPAC-711C2, Руководство пользователя

Страница: 36 / 53

Billion BIPAC-711 C2 / 7100S ADSL Modem/Router
32
Start Address:
Enter the start address of this local IP network address pool. The pool is a piece of
continuous IP address segment. The default value is
192.168.1.100
.
End Address:
Enter the last address of this local IP network address pool that you want the DHCP
server to assign IP addresses to. The default value is
192.168.1.199
.
With this case, the DHCP pool is from 192.168.1.100 to 192.168.1.199. Therefore, the local computer will
get an IP address located at this range randomly.
3.4.3.3 System
There are six items under the
System
section: Password, Time Zone, Upgrade, Factory Setting, and
Reboot.
3.4.3.3.1 Password
In factory setting, there is no password protection when user accesses BIPAC-711 C2 / 7100S. It is
recommended that you change the default password <BLANK> to ensure that someone cannot adjust
your settings without your permission. <BLANK> means there is no password. Every time you change
your password, please record the password and keep it at a safe place.
Please note that the maximum input for password is
16
alphanumeric characters long. Since it is
case
sensitive
, be sure that you remember whether a letter is in upper or lower case and make sure that your
Caps Lock is off.
3.4.3.3.2 Time Zone
BIPAC-711 C2 / 7100S does not have a real time clock on board; instead, it uses the simple network time
protocol (SNTP) to get the current time from the SNTP server in outside network. Please choose your
local time zone and click Submit. You will get the correct time information after you really establish a
connection to Internet. The current time of selected time zone will be shown in the Status – System
window.
Automatically adjust clock for daylight saving changes:
It is optional for different time zone area.
SNTP Server IP Address:
Specify the IP address if you want to use your familiar SNTP server.