Trip Meter Reset
With the power on press and hold both the
POWER
and
DOWN
buttons to reset the trip
odometer.
Entering Walking Mode
Press and hold the
DOWN
button to enter walking assist mode. This will power the motor and
move the bike at 6km/h for you to walk alongside the bike. To exit this mode, release the
DOWN
button.
Battery Capacity
Four sections will be filled when the battery is full. When the battery is low the icon will flash.
The percent capacity of the battery left per section is as follows:
Display Settings
Entering the Settings Mode
With the display powered on press and hold the
UP
and
DOWN
buttons to change display
settings.
Units
Press the
UP
button to switch display’s units for speed and distance between Km or Miles.
Press the
POWER
button to save your selection and advance to the next parameter.
Speed Limit
Use the
UP
and
DOWN
buttons to change the speed limit of the motor. This will stop the
motor from functioning accelerating the bike further once you go above the set speed. Press
the
POWER
button to save your selection and advance to the next parameter.
