Page 6 of 8
Now that all connections have been made, use included zip ties to tidy up wire
routing. Make sure there are no exposed connector contacts.
Battery hot lead between tank and frame.
Use zip tie behind tank.
Figure 4 – Power connection
final Step: power Connection to Titan Amp (Wire #3 & Wire #6)
Use fused supply lead to connect battery to amp.
Make sure fused end is closest to battery!
5.1 Starting at front of tank, route amplifier end of supply lead between tank
and frame.
5.2 Run wire inside of both tank mount and fuel crossover (Figure 4a).
5.3 Run amplifier side of supply lead along other wires into fairing compartment
and connect amp with quick-disconnect spade connector.
5.4 Zip tie lead to harness between tank and fairing.
5.5 Now grip wire behind and in front of tank and pull up to route wire
underneath gas tank. Use zip tie to anchor amp hot lead just behind tank
(Fig. 4b.)
5.6 Place fuse holder and wire service loop into frame cavity avoiding wire
contact with any sharp edges.
5.7 Finally, connect the battery supply lug to the positive terminal of the
battery.
Step 5
