Bikespeed RealSpeed, Инструкция по установке и описание функций

Страница: 16 / 32

page 16
Notes on installation, removal, storage,
maintenance, and use
Installation, repair, commissioning, and decommissioning may only be
carried out by the manufacturer of the pedelec or an authorized specialist
workshop.
During installation, ensure that the ergonomic principle and functionality
of the pedelec are not changed or impaired.
The protection class of the bikespeed-RS is IP64. The bikespeed-RS does
not require a separate power source. It is supplied with energy from the
battery of the pedelec in which the tuning is installed. This battery is
charged via the power supply unit provided by the manufacturer of the
pedelec.
No maintenance or service is required on the bikespeed-RS. After
decommissioning, no special precautions need to be taken to put the
product back into operation.
If the product is stored in a dismantled state, this must be done in a dry
place between 0 and 40 degrees Celsius and 30 to 70 % relative humidity.
Use in the installed state may only be carried out by specially trained and
adult users without physical and physical limitations.
The use is not limited in time but may only take place as long as the
physical and mental condition of the user allows to operate the pedelec
under full concentration.