425-821-7237
12518 130th Lane NE • Kirkland, WA 98034 • USA
www.BikeFit.com
LIMITED WARRANTY
BikeFit warrants this laser by providing a limited 60-day warranty
from purchase date. Should this product fail due to defects in
material or workmanship under normal use within this period,
BikeFit will at its own discretion, repair or replace the defective
part. This warranty is not transferable.
This warranty does not cover products which are misused,
abused, mishandled, improperly installed, improperly stored,
changed, modified, or are subjected to extreme temperatures or
extreme moisture levels. This warranty is not valid for products
used for any purpose other that the purpose for which they were
originally intended.
The repair(s) or replacement(s) of our products are contingent
on availability of the items. If a warranty claim is filed after the
product has been discontinued or modified, BikeFit reserves the
right to honor the warranty in the following fashions.
1. To repair or replace the affected component with a new
component of the same style.
2. To repair or replace the affected component with similar and
comparable product.
This warranty is the exclusive warranty of BikeFit and is in lieu of
all other warranties, express or implied. In no event shall BikeFit
be liable for the consequential, indirect or incidental damages
resulting from the installation, use, or failure of its product.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions
may not apply to you. This limited warranty gives you specific
legal rights. You may also have other rights that vary from state-
to-state.
To submit a claim under this warranty, contact the nearest
BikeFit dealer, or send a letter explaining the defect, with a dated
sales receipt as proof of purchase to (do not send merchandise
unless requested by the Claims Department):
12518 130th Lane NE
Kirkland, WA 98034
SAFETY INSTRUCTIONS
WARNING:
Never shine a laser directly into eyes, doing
so can cause serious eye injury. Laser level is a precision
tool, handle with care. Avoid water, shock, vibrations, and
extreme temperatures.
• Follow the these safety instructions.
• Avoid exposure, laser radiation is emitted from this tool.
• Keep the laser ‘on’ only when necessary.
• Do not disassemble Laser.
• Do not aim laser at reflective surfaces.
• Restrict unauthorised use.
• Do not remove warning labels.
Made in China.
DANGER
LASER RADIATION -- DO NOT STARE
INTO BEAM OR VIEW DIRECTLY
WITH OPTICAL INSTRUMENTS
Max output power : <1mw@635nm
Class 2M Laser Product
REPLACING
THE BATTERIES
Unhinge side door
latch to expose
battery cavity.
Requires (3)three AA
1.5V Alkaline or Nicad
batteries.
OFF
ON
pendulum
Unlocked
pendulum
Locked
OPERATION
For transport keep
in ‘Off /Locked’
position to prevent
damage to laser.
If moved, allow
4-6 seconds of
stabilization for
lines to be visible.
Laser lines may
swing slightly due
to vibration from
surroundings.
