2.2 Mount the Headset into Fixture
2.2.1 Guide and slide the headset into the top left side of the fixture.
2.2.2 Press the headset down to secure it to the fixture and when a click sound is heard, the installation is
completed.
2.3 Install the Speakers
2.3.1 Tear off the paper cover of the speaker pad and paste it to the internal side of the
helmet. Locate the proper positions for the speakers before pasting.
2.3.2 Fix the speakers onto the Speaker Pads.
2.3.3 Connect both speakers to the RED connectors of the headset fixture.
Note: For optimal audio clarity, the speakers should be placed as closely as possible to your ears without
compromising comfort.
3.Installation /
Microphone
3.1 Microphone for 3/4 Face Helmet
3.1.1 Detach the inner left side lining of the helmet and use a cleaning pad to clean the urface before pasting.
Remove the paper of the microphone fabric fastener pad, and attach it to the helmet behind the inner
lining.
3.1.2 Fix the microphone to the fabric fastener pad.
3.1.3 Connect the microphone to the headset fixture cable connector (Yellow connector).
3.1.4 For optimal performance, the microphone must be as close to the mouth (1-2 cm) of the user as possible
when installing the microphone.
3.2 Microphone for Full Face Helmet
3.2.1 Attach the fabric fastener pad for microphone to the position inside the helmet right in
front of mouth.
3.2.2 Fix the microphone to the fabric fastener pad.
3.2.3 Connect the microphone to the headset fixture cable connector (Yellow connector).