26
www.bikefriday.com
800-777-0258
•
+1-541-687-0487
14. Lay Bike In Case
With the bike folded, place
the bike into the case, let-
ting the handlebars hang
out of the case. Note the
orientation: the mono-tube
and seat mast are along the
rear of the case, fork on the
left side, rear wheel on top,
drive train facing down and
the left crank arm pointing up in the 12 o’clock position.
Place a
crush protector cap in the bottom middle of the case at this point.
Fig. 14 Bike orientation in case.
Packing: Place Bike in Case
15. (Optional) Insert
Trailer
If you purchased a
TravelTrailer with your bicy-
cle, the trailer in the yellow
felt sleeve fits best under
-
neath the bike in the case.
You will have to partially lift
out the bike to accomplish
this. Note that the long sec-
tion is in the bottom front of the case, under the rear wheel. The
S-bend part of the trailer is pointing toward the left rear corner of
the case, and is placed on top of the mono-tube, but under the rear
Fig. 15 Trailer tongue placement.
Trailer
