5
BIJUR DELIMON INTERNATIONAL
BA_2017_1_GB_PVB
4.
DESIGN AND FUNCTION
The PVB distributor is available in 8 different sizes (or 6 for the stainless steel version), depending of the number of outlets
required. The minimum configuration contains 3 pistons providing up to 6 outlets. Each additional size has an additional
metering piston and an additional pair of outlets.
Dimensions (mm):
Number of Outlets
up to 6
up to 8
up to 10
up to 12
up to 14
up to 16
up to 18
up to 20
L [mm]
60 75 90 105 120 135 150 165
Weight [kg]
0.9
1.1
1.3
1.5 1.7 1.9 2.1
2.3
Note: Stainless steel version has max. 16 outlets
Closing outlets
Within the distributor block it is possible to connect adjacent outlets or outlets that are opposite each other, in order to
achieve a higher metered volume for individual outlets, for example.
WARNING
Special fittings with non-return valves (similar to DIN 2353 - CLL 6 - St fittings) are used to connect the lubrication lines for
6 mm diameter pipes; these also take on a sealing function inside the distributor. These fittings cannot be replaced by
regular cutting ring fittings. The non-return valves that are incorporated into the outlet fittings ensure that the distributor
works in a reliable way even with small quantities of lubricant and high counter pressure in lines made of flexible material.
The flow of lubricant inside the distributor must be guaranteed; otherwise the distributor will become blocked. The following
illustration shows the two alternatives for connecting and locking distributor outlets.
Inlet thread G1/8“
(8 mm deep)
