SKR MINI MZ V1.0 User Guide
Shenzhen BIGTREE Technology co., LTD.
3
/
9
13）Adopt DC5.0 socket power input
12）Reserve BLTouch, PH2.0 normally open fan, hot bed output,
switch
power
input,
resume
printing
while
power
off ,filament break detection
, and automatic shutdown
after printing port；
13）Support offline printing and online printing；
14）Reserved double Z-axis port
15）Support onboard SD card printing function
16）Onboard EEPROM: AT24C32
17）Support RGB light bar
2.Motherboard Parameters:
1）Appearance size: 100.7mm*70.8mm
2）Installation size： 59.7*51mm
3）Microprocessor： ARM 32-bit Cortex™-M3 CPU
4）Power Voltage：DC12V--DC24V
5）Motor Driver：Integration of TMC2209 UART mode
6）Motor drive interface：X、Y、Z0、Z1、E
7）Temperature sensor interface：BED、T0
9）Display：2.4 inch TFT/LCD, 3.5 inch TFT /LCD(Note: MEGA Zero
original screen is not supported)
10）PC communication interface：MINI USB（USB 2.0）, easy to
plug and unplug, communication baud rate 115200
11）Expand the interface function support: Resume Printing
While Power Off,Filament Break Detection, Automatic Shutdown
After Printing, Automatic leveling BL Touch,ect.
12）Support file format: G-code
13）Supported machine architecture： MEGA Zero
14）Recommended software： Cura、 Simplify3D、 pronterface、
Repetier-host、Makerware
