BigDishSatellite, Mouriol, 87440 Milhaguet-Marval 05 55 78 72 98
www.bigdishsat.com
The process is now repeated for the elevation so make sure the
elevation locking nuts are loose and start to turn the elevation
adjusting bolt in one direction … as before, wait until the pitch
of the beep-beep drops and then stop turning. Start turning
the other way listen for the pitch getting higher and then when
it starts to drop, stop turning.
Turn the bolt the other way again and the pitch should get
higher and then turn into a solid high pitched tone.
When that happens, you can tighten your elevation locking
bolts.
As a final test, and with the high pitched solid tone coming
from the Tria, very gently flex the dish to the left, right then up
and down just by using your fingers. As long as the tone lowers
in all 4 directions, your dish is correctly aligned.
At this stage, come back to the computer and look at the Viasat modem status page and it should
look like the image above … with the third image outlined and a green tick. This third image
represents the solid high pitched tone being generated by the Tria. You can now click on the right
arrow and the modem will go through the synchronisation process to connect to the internet.
Once the modem has synchronized, the status page should
look like this image.
