Bigben TD98, Инструкция по эксплуатации

Страница: 17 / 53

II) ENCODING 1 DISC
1. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE
THE CO DOOR
2. PRESS THE “ RECORD “ BUTTON (9) AFTER FOCUS SEARCH COMPLETED. UNIT
WILL DISPLAY “ “ & “ “ AND FLASHING. ENCODING IS PERFORMING NOW.
3. AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
III) ENCODING BY PROGRAM
1. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE
THE CO DOOR
2. SELECT THE DESIRE TRACKS BY FOLLOWING “ CD DISC PROGRAMMING
“ PROCEDURES. THEN PRESS “ CD PLAY/PAUSE/STOP “ BUTTON (2) TO START
PLAYBACK.
3. DUYING CD PLAYBACK, PRESS AND HOLD THE THE “ CD PLAY/PAUSE/STOP
“ BUTTON (2) FOR 2 SECONDS TO ENTER THE STOP MODE.
4. PRESS THE “ RECORD “ BUTTON (9) AND THE UNIT WILL DISPLAY “ “ & “
“ & FLASHING. ENCODING IS PERFORMING NOW.
5. AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY.
REMARK:-
- THE RECORDING SPEED IS 1:1 AND ACCORDING TO THE ACTUAL PLYING TIME OF
THE CD TRACK
- THE SYSTEM WILL CREAT A “ AUDIO “ FOLDER AND THEN STORE THE ENCODING
TRACK IN IT.
- THE RECORDING FORMAT IS PRESET AT – MP3 BIT RATE : 128 KBPS, SAMPLING
RATE : 44.1KHZ
- NO SONG TITLE WILL BE RECORDED DURING ENCODING MODE
- TO INTERRUPT THE RECRODING, PRESS THE “ RECORD “ BUTTON AGAIN DURING
RECORD MODE.
- RECORDING WILL BE COMPLETED ONLY ENTIRE SONG BEING ENCODED, IF
TERMINATE THE ENCODING PROCESS INTERMEDIATELY, THERE IS NO TRACK
BEING RECORDED NOR STORED TO THE USB OR SD/MMC CARD
IV) COPYING OF MP3/WMA FILE
IF PUTTING A MP3/WMA DISC INSTEAD OF A CD-DISC, THE SYSTEM WILL COPY THE
FILES TO THE USB OR SD/MMC CARD IF PRESS THE “ RECORD “ BUTTON (9). THE
OPERATION PROCEDURES IS SAME AS CD ENCODING AS STIPULATE ON ABOVE, AND
THE SYSTEM WILL SWITCH TO COPYING MODE ONLY IF MP3/WMA FILE BEING READ.
REMARK:
-
THE SYSTEM WILL STORE THE FILE TO USB SORCE FIRST IF BOTH USB AND SD
SLOT ARE BEING OCCUPLIED BY STORAGE MEDIA.
- IF PRESS THE “ RECORD “ BUTTON DURING PLAYBACK OF USB OR SD SOURCE,
THE FILE WILL COPY FROM USB TO SD OR SD TO USB.
B) PHONO ENCODING
1) SET THE FUNCTION BUTTON TO “ PHONO “ MODE AND THEN PRESS THE “ RECORD
“ BUTTON (9) DIRECTLY.
2) THE LCD DISPLAY WITH SHOW THE WORD “
USB
“ AND THEN FLASHING, AND THEN
DISPLAY “ “ & “ “ AND FLASHING AFTER FEW SECONDS. NOW THE
SYSTEM IS STARTING THE ENCODING MODE.
3) START PLAYBACK AT PHONO FOR THE TRACK WHICH YOU WANT TO RECORD TO
USB.
4) AFTER FINISH OF RECODING, PRESS AND HOLD THE “ RECORD “ BUTTON (9) UNTIL
THE LCD STOP FLASHING AND RETURN TO “ PHONO “ MODE.