Big Sky International, Inc. 970 W Broadway, Ste E289 Jackson, WY 83001 USA
pg 3 of 3
Revised 2019-08-15
www.BigSkyInternational.com 888-535-7085
Setting up Moon View (MV) option
1)
Set up Big Sky’s Wisp 1P Moon View (MV) tent normally.
2)
There are stake/peg loops attached to inner floor at (1) and (5). There are also ring and toggles
holding inner and outer together. Disconnect ring on outer from toggle on inner, then swap the
stake/peg loops on outer at (1) and (5) for stake/peg loops on inner. See drawing below:
3)
After the inner and outer have been disconnected, and the inner is staked/pegged, the outer can
be rolled up and secured with tie backs.
4)
This configuration can be used to enjoy viewing the stars/moon or add extra ventilation.
Note: This configuration is NOT as storm worthy as when not used/closed, and stakes/pegs are
connected to four (4) webbing stake/peg loops.
Packing instructions:
1)
Reverse the setup instructions
2)
We suggest rolling rather that stuffing. It results in a smaller volume. We also suggest rolling the
end pole and stakes up in the tent or carrying them separately.
Caution: Trying to “stuff” the poles and/or the stakes/pegs may result in tearing the mesh or tent.
