Fig.1:
Inert Screen 2 (B) into Screen 1 (A), fully tighten by M6X15 Flat Bolt (CC) and M6 Washer (BB). Then
attach Top Pole Connector (C) to Screen 1 (A) and Screen 2 (B) by (CC) and M6 Washer (BB).
Fig.2:
Attach the assembled Screen to Pole (D) by M6X15 Flat Bolt (AA) and M6 Washer (BB).
Fig.3: Connect Co
r
n
e
r Top Pole(1) (E) and Co
r
n
e
r Top Pole(2) (E1), then attach Co
r
n
e
r Top Pole (E1) to the top of
Pole (D) by M6X45 Bolt (DD), M6 Washer (BB) and M6 Nut (EE).
Fig.4:
Put Hook (I) to Big Top Connector (G), then insert Co
r
n
e
r Top Pole
(E) and Middle Top Pole (F) into Big Center Connector (G).
Fig.5:
Attach Middle Top Pole (F) to Top Pole Connector (C) by M6X45
Bolt (DD), M6 Washer (BB) and M6 Nut (EE).
Fig.6:
Insert Small Top Pole (J) into Small Center Connector (H).
Fig.7:
Put Big Canopy (K) onto the Big Top, do not fold, then attach the
Small Top to Middle Top Pole (F) by M6X45 Bolt (DD), M6 Washer (BB)
and M6 Nut (EE).
