Big Bike Parts TireGard, Руководство пользователя

Страница: 20 / 23

19
Definition of Warnings
Item Status Purpose Pattern
1.
Power on LCD
Receiver/Monitor To remind rider power is
on Beeps once
2.
Tire pressure is below lower
warning range The warning of low tire
pressure Beeps for 3 times, vibrating and
backlight on. Repeats for 5 times.
3.
When tire pressure is below
lower warning range, each 1
PSI down, warnings will be
given. The warning of tire
pressure getting lower Beeps for 3 times, vibrating and
backlight on. Repeats for 5 times.
4.
Tire pressure is higher than
upper warning range The warning of high tire
pressure Beeps for 3 times, vibrating and
backlight on. Repeats for 5 times.
5.
When tire pressure is higher
than upper warning range,
each 1 PSI up, warnings will
be given. The warning of tire
pressure getting high Beeps for 3 times, vibrating and
backlight on. Repeats for 5 times.
6.
Tire temperature is higher
than upper warning value The warning of high tire
temperature Beeps for 3 times, vibrating and
backlight on. Repeats for 5 times.
7.
When tire temperature is
higher than upper warning
range, each 1 PSI up,
warnings will be given. The warning of tire
temperature getting high Beeps for 3 times, vibrating and
backlight on. Repeats for 5 times.
8.
Learnable sensor is integrated Finish learning mode Beeps once
TROUBLESHOOTING
The following checklist will help you remedy problems you may encounter with your unit. Before
going through the checklist below, check the connection and operating procedures.
1. Indications disappear from or do not appear in the display
a. Make sure power switch is on.
b. Make sure monitor has AAA battery properly installed observing correct polarity.
c. Use fresh batteries if necessary.
2. No connection between sensors and monitor and you find all tire pressure values are gone
(indicated by 3 dashes ‘---‘.)
a. Make sure sensor has CR1632 battery properly installed observing correct polarity.
b. Use fresh batteries if necessary.
3. Monitor display is getting dark.
a. When temperature is over 80° Celsius, it is natural that LCD screen will get dark.
When temperature is back to normal, LCD screen will revert back to its normal appearance.
b. When the temperature is below -20° Celsius, the response time of LCD screen will be
slower.
4. ‘Learning mode’ can only accept ‘learnable sensors’ not standard sensor.