Big Banana BB700, Инструкция по эксплуатации

Страница: 33 / 34

33
www.bigbananatools.com
appendix (c) contd.
PS100 OBDII/CAN OBDII
A7 Mis-Fire Cylinder 6 Data
A8 Mis-Fire Cylinder 7 Data
A9 Mis-Fire Cylinder 8 Data
AA Mis-Fire Cylinder 9 Data
AB Mis-Fire Cylinder 10 Data
AC Mis-Fire Cylinder 11 Data
AD Mis-Fire Cylinder 12 Data
AE - BF Reserved by document for future standardisation
C0 OBD Monitor IDs supported ($C1 - $E0)
C1 - DF Reserved by document for future standardisation
E0 OBD Monitor IDs supported ($E1 - $FF)
E1 - FF Vehicle Manufacturer defined OBDM IDs
TID(STANDARDIZED TEST ID DESCRIPTION)
Range (Hex) Description
00 Reserved by document
01 Rich to lean sensor threshold voltage (constant)
02 Lean to rich sensor threshold voltage (constant)
03 Low sensor voltage for switch time calculation (constant)
04 High sensor voltage for switch time calculation (constant)
05 Rich to lean sensor switch time (calculated)
06 Lean to rich sensor switch time (calculated)
07 Minimum sensor voltage for test cycle (calculated)
08 Maximum sensor voltage for test cycle (calculated)
09 Time between sensor transitions (calculated)
0A Sensor period (calculated)
0B EWMA(Exponential Weighted Moving Average)misfire counts for last 10 driving cycles
(calculated)
Calculation: 0.1 * (current counts) + 0.9 * (previous average)
Initial value for (previous average) = 0
0C Misfire counts for last/current driving cycles (calculated)
0D - 7F Reserved for future standardisation
www.Xtooltech.com 28