Big Banana BB700, Инструкция по эксплуатации

Страница: 23 / 34

23
www.bigbananatools.com
operation instructions
Below is a list of the abbreviated Oxygen Sensor Data.
Mode 6 Testing
Mode 6 is a request for On-Board Monitoring Test Results for
Continuously and Non-Continuously Monitored System. There
are typically three values: a minimum value, a maximum value,
and a current value for each non-continuous monitor.
Initiating a Mode 6 Test
1. Press the Escape key.
2. Select
Mode 6
(option 8) and
press the Enter key.
Abbreviated Name Expanded Name
RichToLeSeThV(Con) Rich to lean sensor threshold voltage (constant)
LeanToRiSeThV(Con) Lean to rich sensor threshold voltage (constant)
LowSeVFoSwTiCA(Con) Low sensor voltage for switch time calculation
(constant)
HighSeVoFoSwTiCa(Con) High sensor voltage for switch time calculation
(constant)
RichToLeSwTi(Cal) Rich to lean sensor switch time (calculated)
LeanToRiSeSwTi(Cal) Lean to rich sensor switch time (calculated)
MinSeVoForTeCy(Cal) Minimum sensor voltage for test cycle
(calculated)
MaxSeVoForTeCy(Cal) Maximum sensor voltage for test cycle
(calculated)
TimeBeSeTr(Cal) Time between sensor transitions (calculated)
Sensor period(Cal) Sensor period (calculated)