background image

Conforms to UL Standard 1598, 
UL Standard 8750, CSA Standard 
C22.2 No. 250.0, and CSA 
Standard C22.2 No. 250.13

CAUTION: Risk of electric shock. Disconnect power before servicing. 
Driver has more than one power source. Disconnect both sources by 
turning off the AC branch circuit and disconnecting the unit driver 
connector.

CAUTION: Install luminaire suspension cables correctly. Cables must be taut and secure.
WARNING: This luminiare and emergency LED driver have not been evaluated to NFPA 
101 (Life Safety Code) or ISO 30061:2007 (Emergency Lighting).
CAUTION: Risk of electric shock. Complete installation and apply AC power before 
mating the driver unit connector located on top of the fixture.
The light source contained in this fixture shall only be replaced by the manufacturer or 
his service agent or a similar qualified person.
Suitable for damp locations. 
The product warranty will not cover equipment damage or failure caused by improper 
installation.
Connection of the product to the mains must be performed by qualified persons in 
accordance with all applicable codes. Code compliance is your responsibility. Failure to 
comply with these codes could result in personal injury or property damage.
Maintain reinforced insulation between LV supply and control conductors.
This luminaire must be mounted or supported independently of an outlet box.
Not for use in dwellings.
Fixtures with driver require an unswitched AC power source of 120–277 VAC, 50/60 Hz.

READ AND SAVE THESE INSTRUCTIONS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation.

www.bigassfans.com/patents   

   www.bigassfans.com/product-warranties

BAF-DBL1-24xx01yyxxxxxxS1, BAF-DBL1-30xx01yyxxxxxxS1, BAF-DBL1-36xx01yyxxxxxxS1, 
BAF-DBL1-48xx01yyxxxxxxS1, BAF-DBL1-60xx01yyxxxxxxS1, BAF-DBL1-72xx01yyxxxxxxS1

Power Factor (PF)

Supply Current (A)

120 V

277 V

120 V

277 V

24 K

0.997

0.959

1.18

0.52

30 K

0.998

0.972

1.46

0.63

36 K

0.997

0.936

1.86

0.82

48 K

0.998

0.963

2.53

1.11

60 K

0.996

0.923

3.34

1.53

72 K

0.997

0.948

4.19

1.85

Содержание Delta T LLC dba













Отзывы: