3
To lay the tower down
:
If the rear mounts are completely parallel
:
1.
Loosen the 10 mm bolts on the rear legs to allow the tower to tilt back.
2.
Unthread the 10mm bolts connecting the front legs to the base mount on each side.
3.
Lay the tower down.
4.
Reassemble in the reverse order.
If the rear mounts are skewed:
1. Unthread the 10mm bolts connecting the front legs.
2. Unthread one of the 10mm bolts from one of the rear legs.
3. Lay the tower down.
4. Reassemble in the reverse order.
