Bifinett KH 398, Руководство по эксплуатации и технике безопасности

Страница: 5 / 8

5
SPECIFICATION
Removable grill/warm plate Raclette pans with insulated handles
Heating coil Thermostatic control
Grill/warm plate support Indicator light
Housing Cable storage (on underside)
Pan base for raclette pans
TECHNICAL INFORMATION
Electrical supply: 230 V ~ 50 Hz
Power rating: 1200 Watt
Protection class: I
USING FOR THE FIRST TIME
• When using the equipment for the first time, allow it operate for approx. 5 minutes without
anything on the grill so that any protective coatings are removed. Some smoke is normal in these
circumstances. Make sure you have adequate ventilation.
• Raclette pans with non-stick coating: Lightly grease the pans and grill plate and place
the raclette pans into the pan base .
• When cool, clean the pans and the removable grill in a washing-up bowl or sink.
The equipment is now ready for use.
USING THE RACLETTE GRILL
1. If possible you should cut up all the ingredients to be used on the grill and in the pans
into small pieces or slices.
2. Lightly grease the pans and the grill plate .
3. Now connect the raclette grill to the mains. To do this, unwind the cable and insert the plug
into the mains socket (230 V ~ 50 Hz correctly installed and earthed supply).
4. Switch on the equipment by setting the thermostatic controller to the maximum
heat setting ( MAX. ) and let it heat up for approx. 10 minutes.
NOTE: The thermostatic controller is infinitely adjustable. The indicator light shows the current
operating status (ON = indicator light illuminated, OFF = indicator light is not illuminated).
5. Place the item to be grilled on to the grill plate . In the pans you can cook items of your choice
topped with cheese, e.g. mushrooms, ham or small sandwiches. WARNING: To avoid damaging
the non-stick coating or the pans, use a wooden spatula or similar to turn or remove the cooked items
from the grill plate
, and use the supplied wooden scrapers to loosen items cooked with toppings
from the pans.
6. You can use the grill plate as a warming plate to keep your food warm. Set the thermostatic
controller to the minimum heat setting ( MIN. ).
7. After use pull the plug out of the mains socket. Let the equipment cool down and clean it as
described under »Cleaning«.