Installation, Operation and Maintenance Manual
MAN 575 Rev. 4
July 2020
1
General Warnings
Section 1: General Warnings
Section 1: General Warnings
NOTE:
The manual is an integral part of the machine, it should be carefully read before carrying
out any operation and it should be kept for future references.
1.1
Generalities
Biffi Italia s.r.l. actuators are conceived, manufactured and controlled according to the Quality
Control System in compliance with EN-ISO 9001 international regulation.
1.1.1
Applicable regulation
UNI EN ISO 12100-1: 2005:
Safety of machinery
– Basic notions, general design principles.
Part 1-Basic terminology, method.
UNI EN ISO 12100-2: 2005:
Safety of machinery
– Basic notions, general design principles.
Part 2-Technical principles and specification.
2006/42/EC:
Machine directive
97/23/EC:
Directive for pressure PED equipment
(until 18 July 2016)
2014/68/EU from 19 July 2016
2006/95/EC:
Directive for low voltage equipment
(until 19 April 2016)
2014/35/EU from 20 April 2016
2004/108/EC:
Directive for the electromagnetic compatibility
(until19 April 2016)
2014/30/EU from 20 April 2016
94/9/CE:
Directive and safety instructions for use in hazardous Area
(until 19 April 2016) 2014/34/EU from 20 April 2016
NOTICE
Biffi Italia s.r.l. pays the highest attention to collecting and verifying the documentation
contained in this user manual. However Biffi Italia s.r.l. is not liable for any mistakes
contained in this manual, for damage or accidents due to the use of the latter. The
information contained is of exclusive reserved ownership of Biffi Italia s.r.l. and may be
modified without prior notice. All rights reserved.
