OLGAS-H
– High pressure spring return hydraulic actuator
Use and maintenance manual
© Copyright by BIFFI Italia. All right reserved.
Pag. 30
Contents may change without notice
If the index (Picture 12), does not signal the proper position of the
valve but is turned by 90°:
❑
Remove the roll pin placed on the position indicator (index).
❑
Turn the indicator until reaching its proper positioning.
❑
Put the roll pin back in its position.
End of stroke micro-switches should be operated
before the stop of the stroke of the actuator due to
mechanical stops. Adjust the relative cams properly.
pin
Picture 12
– Position indicator and pin for
micro-switches box
Position
indicator
(index)
