33
075
22
10
36
100
22
10
36
135
22
10
36
175
22
14
46
200
27
14
46
235
27
17
65
280
27
17
65
300
36
17
110
Installation, Operation and Maintenance Manual
MAN 564 Rev. 6
June 2020
Operation and Use
Section 3: Operation and Use
For the adjustment of the mechanical stop on the end flange of hydraulic cylinder of MHP,
follow these steps (Figure 34):
•
Remove with the specific wrench (c1) the plug (t).
•
Insert a wrench for Allen keys (c2) in the through hole until reaching the
adjustment pin (g).
•
Keep the protection cover blocked with the special wrench (c3).
•
Turn counter-clockwise to increase the angular stroke, turn clockwise to decrease it.
•
When the adjustment is over tighteen the plug (t).
Figure 34
Mechanical stop of the MHP cylinder
Table 17.
Hydraulic cylinder size
Wrench c1 (mm)
Wrench c2 (mm)
Wrench c3 (mm)
c2
c1
c3
t
g
