Biegler RESPIFIT S Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 31

Biegler RESPIFIT S Скачать руководство пользователя страница 22

RESPIFIT S

22

6 MAINTENANCE

The inspiratory muscle training device RESPIFIT S is designed as a low-
maintenance device.

For long-term maintenance of quality and functional safety, please
observe the following points:

The handheld  patient module must  only  be  used  repeatedly  by  a single
patient for reasons of hygiene. The cleaning directions, as set out in the
instructions  for  use,  must  be  meticulously  observed  in  order  to  achieve
repeated  use  of  the  handheld  patient  module  (for  cleaning  instructions
see Section 5).

Avoid exerting force on the training device or its accessories.

If the device is dropped, damaged due to force, or functions in a way
other than described in the instructions for use, stop using the system
and return it to the service centre.

6.1 Troubleshooting

Errors

Possible cause

Solution

Display is
blank.

No power supply

Insert the mains plug.
If the error persists, send the
device for servicing.

“DATAKEY “

Datakey is not
inserted or
datakey is inserted
incorrectly or
datakey is
defective.

Insert

datakey.

If

the

error

persists, the datakey may be
incorrectly

inserted

or

faulty.

If the datakey is faulty, request a
new one from the doctor /
therapist.

6.2 Periodic Inspections

The  periodic  technical  safety  inspections  (according  to  EN 62353,  for
example)  must  be  carried  out  on  the  therapy  device  at  least  every  24
months. Contact the treating physician / therapist, the clinic or the retailer
to  arrange  this.  The  periodic  inspection  must  be  carried  out  by  trained
and  knowledgeable  persons  who  have  practical  experience  and  are
qualified to carry out such technical safety inspections.

•

The safety labels on the device and its accessories must be easily

legible.

«
...
20
21
22
23
24
...
»

Содержание RESPIFIT S
































Отзывы:

Нет отзывов