I
SOL
A
IR
M
ANUAL
I
NSTALLATION
Manual version 1.1 (07-04-2016)
en-15
en
2.5
Installing the control box
2.5.1 Mounting and connecting the control box
Warning:
w
Make sure that the mains supply group with
which you are working has been turned off.
Warning:
w
The unit must be earthed.
Caution:
c
When installing the unit, use the wiring diagram
supplied.
1. Fasten the control box near to the unit.
2. Open the control box:
- Remove the 4 screws.
- Remove the cover.
3. Lay the cable between the control box and the unit.
4. Connect the cable to the control box:
- Fit a cable gland for pull relief.
- Lead the cable into the control box.
- Connect the cable to terminal block X20
1
, in accord-
ance with the wiring diagram.
Warning:
w
Connect the earth wire to the screw in the
control box.
Note:
n
Do not close the control box yet.
