Biddle Innovair School, Инструкция по установке, эксплуатации и обслуживанию, Страница: 8 / 27

Page 8 v2.1
Section 2. INSTALLATION – Typical Cased Unit
Continued
CASED UNIT - ASSEMBLING
COMPLETED ASSEMBLY CASED UNITS
Unit installed and ready to operate.
Make sure all debris is removed from the unit and
surrounding area.
3
2
1
3
Assemble casing in following order:
1.
Attach plastic end panels using screws on front
edge.
2.
Attach front access panel. Locate lip on top edge of
panel into retailing channel on upper casing (A)
Push home access panel into channel and fix using
two screws supplied.
3.
Attach recirc grille access panel. Locate top edge of
recirc grille access panel beneath bottom edge of
main access panel. Push home grille panel in an
upward direction at the same time turning the panel
vertically. Fix using the two screws provided on
bottom edge.
Figure 6
Figure 7