BIC WINDSURF
FOIL
USER MANUAL
10. Gently lean the
Board and Foil to one
side, carefully walk
around the front of the
Foil, place one hand
on the Foil, one hand
on the front footstrap
of the board, and
finally turn the board
upright so that it rests
on the Foil.
11. Finally, check that the screw inserts of the
Foil are well aligned with the screws holes
on the board. If necessary re-align the Foil
to the front or the back. Insert the Foil Fin
Box screws, and tighten them with the key
provided. Screws should be hand tight so that
the wing is held firmly in place without play.
Be careful not to over-tighten the screws.
12. You are ready. Re-read the safety
instructions, double check that the water
and wind conditions are still appropriate for
Windsurf Foiling, be careful of other water
users, and go and enjoy flying your Foil!
DISASSEMBLY INSTRUCTIONS
1. Place the board and foil on a protected surface (grass, sand or board bag).
2. Unscrew the Foil Fin Box screws completely.
3. Turn the board upside down, inversing Assembly #10.
4. Remove the front and rear wings.
5. Place two hands on the body of the Foil as per Assembly #7. Place your front foot just in
front of the fin box. Gently work the Foil out of the board with small front to back movements.
6. Place all Foil components in the carry bag provided so that they are ready for your next session.
7. Rinse your Foil components in fresh water after each use. Ensure that the screws are clean
and free of corrosion.
