Bibby Sterilin Stuart SS10, Инструкция по эксплуатации

Страница: 5 / 28

Spares
The following spares and accessories are
available from your laboratory dealer:
Description Catalogue
Number
Fuse, T1A ESS20C1(S)
Top case grommet USS20C5
Chuck protective cover USS2056
For complete paddle, order rod plus head(s)
Paddle rod, 350mm SS10/5
Paddle rod, 550mm SS10/6
Small paddle head SS10/10
Large paddle head SS10/11
Large propeller head (2 blade) SS10/12
Small propeller head (4 blade) SS10/13
Anchor paddle head SS10/14
Stand, General Purpose
(inc. base, rod & bosshead)
SS10/1
Stand, Heavy Duty
(inc. base, rod & bosshead)
SS10/2
For a comprehensive list of parts and a Service
Manual required by service engineers conducting
internal repairs, please contact the Technical
Service Department of Barloworld Scientific Ltd.
quoting both the model and serial number.
Only spare parts supplied or specified by
Barloworld Scientific Ltd. or its agents should be
used. Fitting of non-approved parts may affect
the performance and safety features designed
into the instrument.
If in any doubt, please contact the Technical
Dept. of Barloworld Scientific or the point of
sale.
Barloworld Scientific Ltd.
Stone, Staffordshire ST15 0SA
United Kingdom
Tel: +44 (0) 1785 812121
Fax: +44 (0) 1785 813748
e-mail equipment@barloworld-scientific.com
www.barloworld-scientific.com
Warranty
Barloworld Scientific Ltd warrants this instrument
to be free from defects in material and
workmanship, when used under normal
laboratory conditions, for a period of
three (3)
years. In the event of a justified claim,
Barloworld Scientific will replace any defective
component or replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused
by installation, adaptation, modification, fitting
of non-approved parts or repair by unauthorized
personnel.
3
Technical Data
SS10 SS20 SS30
Low torque High torque
Speed range 100 - 2000rpm 100 - 2000rpm 100 - 2000rpm 50 - 500rpm
Litre capacity 15L 25L 25L 40L
Max. viscosity 10,000mPas 20,000mPas 20,000mPas 50,000mPas
Max. torque 15Ncm 27Ncm 27Ncm 90Ncm
Input power 50W 80W 80W
Chuck range 1.5 to 13mm 1.5 to 13mm 1.5 to 13mm
Hollow spindle - 8.2mm dia. 8.2mm dia.
Motor type DC permanent magnet DC permanent magnet DCpermanent magnet
Dimensions
- Stirrer (wxdxh) 85 x 175 x 230mm 85 x 195 x 230mm 85 x 195 x 230mm
- Mounting bar 12.7 dia. x 240mm 12.7 dia. x 240mm 12.7 dia. x 240mm
Net weight 1.9Kg 2.1Kg 2.5Kg